The USAlert NP40 Numeric Pager Programmer consists of the programming fixture (labeled UB-07), the programming software (J7 for the NP40), and a USB cable for connection to the computer. The programming software is also used with the USAlert Alpha 2 (J25) and NP35 (J8) pagers.
To program an NP40 pager, install and run the latest programming software. The programmer screen displays three sections labeled Step 1, Step 2, and Step 3. Connect the USB cable to an operational USB computer port and also to the programming fixture. The green power LED on the fixture next to the USB connection should light. If you don’t get a green power light, check your computer’s USB configuration, try another USB port, another USB cable, or another computer.